AcerAltos 19000 User’s Guide
6-10
Listed are the board and options detected in your
computer.
Press INSERT to add the boards or options which
could not be detected or which you plan to install.
Press DEL to remove the highlighted board from your
configuration.
Press F7 to move the highlighted board to another
slot.
Press F10 when you have completed this step.
>Add=INSERT< <Remove=DEL> <Move=F7> <Done=F10>
> AcerAltos Server
Slot 1 (Empty)
Slot 2 (Empty)
Slot 3 (Empty)
Embedded PCI SCSI Controller
Step 2: Add or remove boards
Figure 6-3 Add or Remove Boards
See the section “Adding or Removing Boards” for a detailed procedure.
Step 3: View or Edit Details
The ECU also allows you to view or edit your system configuration information.
You may have to edit your system settings when you add or remove boards,
when you make other hardware changes or when there are device assignment
conflicts. Figure 6-4 shows a sample View or Edit Details screen.
The configuration data on the following screen depends on your CFG file and
may not be exactly the same as the one on your actual screen.
Press ↑ and ↓ to see all information.
See also: Advanced Menus ⇒ View Additional System Information ⇒
Used Resources and Available Resources