Chapter 2 - Setting Up the System 2-9
2.3.2 Turning On the System Power
To power on the system, press the power switch on the front panel. The system
starts up and displays a welcome message, then a series of Power-On Self-Test
(POST) messages on the LCD display screen. The POST messages indicate if the
system is running well or if it failed any of the tests. See Table 1-2 for a list of the
LCD messages.
If the system does not turn on or boot after
pressing the power switch, go to the next
section for the possible causes of the boot
failure.
Power Switch
Figure 2-7 System Power On