Acoustic Research ARE05 manual Inserting your earphones, Choosing and changing sleeves, Welcome

Models: ARE05

1 2
Download 2 pages 63.15 Kb
Page 1
Image 1
Welcome!

Welcome!

Inserting your earphones

Choosing and changing sleeves

Connecting to your audio device

Congratulations on your purchase of the ARE05 Noise-Isolating Earphones. These earphones give you detailed, accurate sound across the full frequency range while isolating outside noise naturally with a custom-fittingin-ear design.

What’s in the package?

Before you get started with these earphones, take a moment to get familiar with the package contents.

Noise-isolating earphones

• 3 silicone earbud sleeves (Small, Medium and Large)

3 foam earbud sleeves (Small, Medium and Large)

Carrying case

L Inserting your earphones Left marking

sleeve

Choosing and changing sleeves stem

Individual AR earphones are designed specifically for either the left or right side. Make sure you find the left (L) or right (R) marking on the inside of each earphone so you know which side is which.

Make sure the sleeves cover the end of the earphone stems.

Experiment with the different sizes and materials in this package to find the right sleeves for you. Changing the sleeves is easy.

1.To remove the sleeve on the

earphone, pull gently on one sides of the sleeve at the base of the stem until the sleeve comes off.

2.Position the replacement sleeve at

a slight downward angle over the earphone stem. Gently push the sleeve up and onto the stem until it fits securely in place.

3.Push the end of the sleeve gently to make sure it covers the stem completely.

1.Turn the volume of your audio device all the way down.

2.Plug the earphone mini-plug into the headphone jack on your audio device.

3.Put on your earphones.

4.Turn up the audio device volume slowly.

Listen safely!

Enjoy your earphones at a safe volume. Avoid or limit the amount of time you listen at higher volumes—permanent hearing loss

may occur if the earphones are used at too high a volume. If you experience a ringing in your ears, or your own voice and other sounds seem muffled, stop using the earphones and consult a hearing professional.

• User’s guide

Finally, gently insert your earphones in each ear, just far enough that they fit securely—do not push beyond the ear canal opening!

Note: Once you’ve put on your earphones, use the cord adjuster to increase or decrease the amount of slack in the cord.

These earphones come with the medium sized silicone sleeves installed. If these don’t fit the way you want them to, try a different size or material—the next section tells you how to change sleeves.

Which material is right for you?

Foam sleeves eventually adjust to the contours of your ear, giving you the tightest fit and most noise isolation.

Silicone sleeves are easier to clean and generally more

comfortable for activities like exercise.

Important: Do not use these earphones when operating a motor vehicle or in any environment where the inability to hear outside sounds may present a danger to you or to others. Sounds that you usually rely on as reminders or warnings may seem unfamiliar when using earphones. If you plan to use earphones around sounds like these, make sure you know how to recognize the sounds with your earphones on.

Page 1
Image 1
Acoustic Research ARE05 manual Inserting your earphones, Choosing and changing sleeves, Connecting to your audio device