ACTiSYS

ACTiSYS ACT-IR2000UL Series User’s Manual

7 ACTISYS ACT-IR2000UL SERIES DRIVER INSTALLATION FOR WINDOWS XP

Following are the instructions to properly install the ACTiSYS ACT-IR2000UL Series under Windows XP.

Important: Do NOT use Windows’ Native Driver. Please use the driver on this CD to assure a smooth installation. If you have plugged IR2000UL into USB port and mistakenly loaded WindowsXP Native Driver, please refer to the “IR2000UL WindowsXP Native Driver Remove Procedure” to remove the driver and follow the “ACTiSYS ACT-IR2000UL Series Driver Installation for Windows XP” to re-install the driver.

1.Insert the attached CD to CD-ROM, Windows will display install manual. Please click Installation, then execute InstallShield Wizard. Please Click on Next to continue.

2.The Installer will install Actisys IR2000UL in the Destination Folder. To install to a different folder, click Browse and select one. To continue, click on Next.

Release 1.5a 2003. 7. 15

7

ACTiSYS Corporation