ADC Broadband System 170

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

DLP-542

Page 2 of 4

ACTIVE ALARMS

Legend:

Access ID=Identifier[-]Shelf-Grp-Slot[-Site(1=Lcl,2=Rmt) -Loop(1=Lp 1,2=Lp 2)]

Access ID	Locn	Circuit ID	Condition	Status	ACO
----------------	----	--------------------	----------------	------	---
T2-1-3-1	NEND		OPTICAL LOS	MJ	NO
T2-1-3-1	NEND		OPTICAL LOF	MJ	NO
HDSL-1-7-1-1	NEND		RECOVERY	MN	NO
HDSL-1-7-1-1	NEND		LOF	MJ	NO
HDSL-1-7-1-1	NEND		T-BERP	MN	NO
HDSL-1-7-1-1	NEND		T-SNR	EV	NO
HDSL-1-7-1-1	FEND		LOF	MJ	NO
HDSL-1-7-1-1	FEND		T-BERP	MN	NO
HDSL-1-7-1-1	FEND		T-SNR	EV	NO
HDSL-1-7-1-2	NEND		RECOVERY	MN	NO
HDSL-1-7-1-2	NEND		LOF	MJ	NO
HDSL-1-7-1-2	NEND		T-BERP	MN	NO
HDSL-1-7-1-2	NEND		T-SNR	EV	NO
HDSL-1-7-1-2	FEND		LOF	MJ	NO
HDSL-1-7-1-2	FEND		T-BERP	MN	NO
HDSL-1-7-1-2	FEND		T-SNR	EV	NO
Page 1 of 1		Press CONTROL-A for assistance

6675-A

Figure 542-1. Active Alarms Screen (Sample)

LOCAL

REMOTE

(SITE = -1)

(SITE = -2)

DS1

LOOP 1

DS1

A FEND

NEND

HLXC

HRX

HLXR

NEND FEND B

DS1

LOOP 2

DS1

TO NETWORK

TO CUSTOMER

KEY

NEND means "PM information collected directly from incoming T1 signals, both at local and remote sites." FEND means "ESF PRM information collected at the opposite ends of spans from the affected circuit and returned to the system via the ESF Datalink, both at local and remote sites". The framing format must be ESF in order for FEND information to be displayed.

Note: For Site 1, FEND information is at A; for Site 2, FEND information is at B.

10263-A

Figure 542-2. T1 HLXC/HRX/HLXR NEND and FEND Locations

2-147