Page 1 of 3
MPU SOFTWARE DOWNLOAD COMMAND
Summary: This procedure is used to download the MPU software into an MPU module. This involves the transfer of two files. It requires 12 to 17 minutes to transfer both files, depending on the type of host computer and the communication program used.
Caution: You must use a Version 5.X module with the Version 5.3 software.
Caution: Perform a configuration upload first. Refer to
1.Log on to the Craft Interface.
Reference:
2.Select System Maintenance from the Main Menu using the arrow keys. Press Enter or Return. The System Maintenance menu displays, as shown in Figure
3.At the System Maintenance menu, select Upload/Download Commands. Press Enter or Return. The Upload/Download Commands menu displays, as shown in Figure
4.At the Upload/Download Commands Menu, select Execute Software Download. Press Enter or Return. The following message displays:
Preparing to execute new software download...
Are You Sure? (y/n)
5.Begin the software download process by pressing Y for yes; or cancel the download process by pressing N for no.
6.If you press Y, all indicators on the APU will be on and the MPU status indicator will flash yellow/green. The following message displays:
Download In Progress
Craft Logged Out
Please Wait
7.Start the program used to transfer the MPU application software from the host computer to the MPU.
Note: You must use the XMODEM protocol to transfer files.
© 2000, ADC Telecommunications, Inc.