ADCP-61-471 • Issue 4 • June 2000 • Section 1: Introduction

3.4 Space Bar

Pressing the space bar when the cursor is in a toggle field changes the item at the cursor. If the item is selected from a list of options, pressing the space bar brings up the next choice.

3.5 “R” Key

If you press the “R” key by itself when you are in a toggle field, the selection will revert to its previous value.

3.6 Control Key

Special functions are activated by pressing the Control key and another key at the same time, as shown in Table 1-1.

 

Table 1-1. Control Key Functions

 

 

HOLDING DOWN THE CONTROL

RESULTS IN…

KEY AND PRESSING…

 

A

Display of the help screen

 

 

D

Termination of the session and logging the user out

 

 

P

Cancellation of the current operation and movement of the

 

cursor to the previous menu

 

 

R

Cancellation of the current operation and refreshing (i.e.,

 

redrawing) of the current screen with the last saved values

 

 

T

Cancellation of the current operation and movement of the

 

cursor to the Main Menu

 

 

3.7 Pop-Up Screens

In some areas of the Craft Interface, screens pop up presenting error data and information screens to assist you in operating the system. The information is displayed in a box that appears in front of the current screen display in reverse image (i.e., light on dark).

3.8 Help Screen

A help screen is available from all screens. Pressing CONTROL-A activates the help screen. The help screen displays information about moving among the fields and making edits.

Page 1-4

2000, ADC Telecommunications, Inc.