44
Identities
This feature helps your VNC viewer
to confirm that a revisited iPEPS is
genuine and not another device
masquerading as an iPEPS. The list
given will retain the identities of all
visited units (that have full security
enabled).
When you first make a secure
connection to the iPEPS, the security
information for that iPEPS unit is
cached within this Identities tab
(i.e. the “identity” is known). The
next time that you connect to the
iPEPS, its identity is checked against
the stored version. If a mismatch is
found between the current and the
stored identities then a warning will
be issued to you.
If an existing iPEPS is fully
reconfigured then it will need to issued with a new identity. In this case the
previous identity, listed in this tab, should be removed so that a new identity can
be created on the next connection.
Load / Save
Configuration File - Reload
Allows you to load a configuration
file saved from this, or another
viewer.
Configuration File - Save
Allows you to save the current
settings so that they can be copied
from one viewer to another.
Configuration File - Save As...
Allows you to save the current
settings under a new name so that
they can be copied from one viewer
to another.
Defaults - Reload
When clicked, all connection
options are returned to the default
settings that are currently saved.
Defaults - Save
When clicked, saves the current connection options as the default set that will
be used in all subsequent VNC connections.