Status
Provide the basic information for NAS Adapter.
Identification
You can change and modify your host, group name and password from this
page. Click “Apply” to save the setting.
Host name: This is used to identify your device on the network. If you prefer
a different name, type in the new name and click “Apply” to save setting.
Group Name: This should be the same as your workgroup. In general, the
default “WORKGROUP” will be OK. But if your workstation belongs to
different workgroup, type in the correct group name to modify.
For Window OS, right click on “My computer” and choose “Properties”, go to
the computer name tab to see your current workgroup.
If using a Mac OS system, to join a Windows workgroup, open the directory
access utility (under Applications-> utilities). Select SMB and click configure to
modify the settings (administrator access required to access this option.)
Note: We strongly suggest you to change the password as soon as you logged
in, to prevent unauthorized access.
Date/ Time Setting
You can change time setting from this page. Clicks “Apply” to save the setting.
By default SNTP is set to Network Time Service otherwise select synchronize to
PC. If internet access is available, we recommended setting SNTP to Network
Time Service instead.