Modify Unit, Delete Unit | ADTRAN 1202076L1, 1202076L2#DC guide

Chapter 8. Telnet/Terminal Menus

	__________________Unit Access Table_________________
Unit ID	Passcode	Type	Polled	PollStatus
20	DEFAULT	Standard	No
3	0033	Standard	Yes	UP
6	0095	TSU Stand Alone	No
8	0022	Standard	Yes	UP

1)Add New Unit

2)Modify Unit

3)Delete Unit

4)	Default Unit Passcode	0022
5)	OK

Figure 8-3.Unit Access Table

Add New Unit

This adds a new device to the table. You must enter a device Unit ID, passcode, unit type, and polled flag. The unit type can be Standard (which supports any TSU/TDU Multiplexer and the ISU 512) or TSU Standalone (a single port TSU with no option card slot). You can select a passcode of 0 to 9999 for each device or DEFAULT, in which the de- fault passcode will be used. See Figure 8-3.

Traps are normally sent from the unit in alarm to the TSU 600. For units in the Unit Access Table that are not chained directly to the TSU 600 but are managed over Inband or the FDL, traps are not automatically for- warded. Polling must be enabled on the TSU 600 for these units in order to receive Traps on the NMS. The TSU 600 can be configured to poll se- lected units for traps by enabling the polled option when adding or modifying a unit entry.

Modify Unit

Allows Unit ID, passcode, device type, and polled flag to be changed for an existing entry in the table.

Delete Unit

Deletes an entry in the table.

8-6

TSU 600 User Manual

61202076L1-1

Image 94

ADTRAN 1202076L2#DC, 1202076L1#DC user manual Modify Unit, Delete Unit

Contents

TSU TSU 600e Part Numbers 1202076L1 1202076L1#DC 1202076L2 1202076L2#DC Trademarks Year 2000 Compliance REN/SOC FIC Usoc Page Canadian Emissions Requirements Canadian Equipment Limitations Affidavit Requirements for Connection To Digital Services Page Page Important Safety Instructions Warranty and Customer Service Table of Contents Operation Configuration MenuStatus Menu Loopback Tests Table of Contents List of Figures TSU 600 Option Modules List of Figures List of Tables List of Tables TSU 600 Overview IntroductionProduct Description Standard Features in the TSU TSU Option Modules Module Name Description Option Module Architecture TSU 600 Option Modules TSU 600 Configuration Applications Router, PBX, Video Conferencing Application Drop and Insert, Voice, and Router Application Set Up Drop and Insert, Voice, and Router Application Receipt Inspection InstallationUNPACK, INSPECT, Power UP Adtran Shipments Include Backup Power Supply 600e only Power ConnectionDC Powered Units Example Installing and Replacing the Power Supply Step Action Grounding Instructions Identification of Rear Panel Layout 1a.TSU 600 Rear Panel 1b.TSU 600 with DC Power Rear Panel 1c.TSU 600e Rear Panel 1d.TSU 600e with DC Power Rear Panel Control Port Input TSU 600 InterfacesNetwork Test Interface Chain Port Output 10BaseT Interface 600e only Option Slot ArrangementSlot Slots Power-up TestingSelf-Test Unit level tests InitializationBoard level tests Set User Passcode Chain-In PC Set Control PortChain In/Chain Out Normal Power-Up Procedure Operation Front Panel CSU Status LEDs System green If the LED is illuminated green , all installedModule Status LEDs If the LED is illuminated red , one or both TSU 600 Front Panel Layout Operation Keys General Menu Operation Selecting and Activating a Menu Item Example of Basic Front Panel Menu Travel Step Action Result Editing the Data Field Display Only Data Fields Exit Any Menu Field Operation Or Display Data Port Identification Module Slots, TSU Front Panel Menu Structure Watch PRO Adtran PC Program Alternate Methods of ControlWatch PRO/LAN Connection Connect the PC Com port to the Chain-In port on Watch PRO/EIA-232 Connection Terminal Mode Connection Telnet Connection Operation Status Menu Complete Status Menu Network Performance Reports NI Perf Rpts Network Interface Performance Report Network Interface Errors NI Errors Active Alarms View History Port Status Clear Port AlarmRemote Port Enet Status 600e only PS Status 600e only Configuration Menu Configuration Menu Network NI Menu Items Network NIXmit PRM Lpbck SET LBOInband BIT Stuffing TSU 600 Clock Sources Network Timing DTE Timing DTE Timed Clock Source BR1TE Slot Internal Timing Internal Clock Source Secondary Timing Secondary Clock Source Normal CSU Timing Normal CSU Unit Menu CTL OFF Map Exchange Map Xchng MenuMAP In Use AB Menu Auto Copy a Temp DS0 Map a and DS0 Map B MenuCreate Temp Edit Temp Review MAPReview Temp Apply Temp a Create Temp Selection Screen Port Configuration Port Config Configuration Menu Utility Menu Utility Menu Tree Set Passcode Factory RestoreTime/Date Enter Passcode from Other Menus Change/Set a Passcode Automatic Time-out FeatureUnit ID No Passcode Desired Port Utility CMD ModeSoftware Revision Software Rev Enet Address 600e only Test Menu Test Menu Network Tests Loopback Tests Local Loopbck Network Interface Loopbacks LLB Ansi FDL PLB Remote LoopbkATT In-Band Ansi FDL LLB Pattern Description Test PatternQrss Pattern SES Pattern ResultBES Sync Run Self-Test Cancel Tests Port Tests Telnet/Terminal Menus Main Menu Status, Config, Util, and Test Menu Options DS0 Maps Configuration Menu Step Action Initializing the Temp Map Applying the Temp Map Editing the Temp MapReviewing Maps Management Configuration Remote Menu AccessUnit Access Table Modify Unit Delete Unit Snmp Read Community Default Unit PasscodeSnmp Read/Write Community System Contact Snmp Trap CommunitySystem Name System Location Flash Download Quit Session Telnet/Terminal Menus Network Manager Appendix a Understanding SnmpBasic Components Agent Commands Message TSU 600 Snmp Access Snmp Trap Configuration Snmp MIB Browser Configuration Snmp MIB Files Appendix B Understanding TR-08 Felp Table B-1. Alarm ConditionsOOF DS0 TR-08 DS0 Conversion TableTable B-2.TR-08 DS0 Conversion Table TR-08 Channel Number Port Appendix B. Understanding TR-08 Network WiringNetwork Pinouts Network Connections Chain-in Connections Control In/ChainTable C-2.Control In/Chain In Pinout Chain-out Connections Chain-OutTable C-3. Chain-Out Pinout 10BaseT Connections 10BaseT 600e only10BaseT Ethernet System Messages Alarm Messages Network Interface NIMessage Description Status Messages Network Interface NI Electrical Specifications SpecificationsT1/FT1 Interface Management Interfaces CompatibilityOption Slot Interface Environmental Specifications Appendix E. Specifications Index Numerics 600 Index-3 Index-4 61202076L1-1 Index-5 Index-6 61202076L1-1 Post-Sale Support Presales Inquiries and Applications SupportRepair and Return