Section 5, User Interface - Menu Descriptions
61179605L5-5B 5-41
Table 5-31. Static IP Settings - for IP over Ethernet Menu Options
Option Description Function
1IP address This options is used to configure the IP address in
decimal dot format (i.e., ###.###.###.###).
2Subnet mask This option is used to configure the Subnet Mask in
decimal dot format.
3Default Gateway This option is used to configure the Default Gateway.
The Default Gateway is used to forward traffic to a
destination outside of the subnet of the Total Access
1240. The Default Gateway is configured in decimal dot
format.
4TFTP IP address This option is used to configure the TFTP IP address.
The TFTP IP address must be configured to use TFTP for
software upgrade. The TFTP address is configured in
decimal dot format.
5Reset IP Factory Defaults This option displays the “Restore IP Factory Defaults
Menu” on page 5-42.
6IP VLAN ID This option is used to set the IP VLAN ID.
The IP VLAN ID must be set between 1 and 4094.
Choosing 1 indicates an untagged VLAN ID. Choosing
between 2 and 4094 indicates a tagged VLAN ID.