35 Chapter3
change the radious server port
8021x system accountport
[port ID]
G Use the 802.1x system account
port global configuration command
to change the accounting port
switch(config)# 8021x system accountport 1816
8021x system sharekey
[ID]
G Use the 802.1x system share key
global configuration command to
change the shared key value.
switch(config)# 8021x system sharekey 123456
8021x system nasid
[words]
G Use the 802.1x system nasid
global configuration command to
change the NAS ID
switch(config)# 8021x system nasid test1
8021x misc quietperiod
[sec.]
G
Use the 802.1x misc quiet period
global configuration command to
specify the quiet period value of
the switch.
switch(config)# 8021x misc quietperiod 10
8021x misc txperiod
[sec.]
G Use the 802.1x misc TX period
global configuration command to
set the TX period.
switch(config)# 8021x misc txperiod 5
8021x misc supportimeout [sec.]
G Use the 802.1x misc supp timeout
global configuration command to
set the supplicant timeout.
switch(config)# 8021x misc supportimeout 20
8021x misc servertimeout [sec.]
G
Use the 802.1x misc server
timeout global configuration
command to set the server
timeout.
switch(config)#8021x misc servertimeout 20
8021x misc maxrequest [number]
G Use the 802.1x misc max request
global configuration command to
set the MAX requests.
switch(config)# 8021x misc maxrequest 3
8021x misc reauthperiod [sec.]
G Use the 802.1x misc reauth period
global configuration command to
set the reauth period.
switch(config)# 8021x misc reauthperiod 3000
8021x portstate
[disable | reject | accept | authorize]
I Use the 802.1x port state interface
configuration command to set the
state of the selected port.
switch(config)#interface fastethernet 3
switch(config-if)#8021x portstate accept
show 8021x E Displays a summary of the 802.1x
properties and also the port sates.
switch>show 8021x
no 8021x G Disable 802.1x function switch(config)#no 8021x
3.1.14 TFTP Commands Set
Table 3.14: TFTP Commands Set
Netstar Commands Level Description Defaults Example
backup flash:backup_cfg G
Save configuration to TFTP and need
to specify the IP of TFTP server and
the file name of image.
switch(config)#backup flash:backup_cfg
restore flash:restore_cfg G
Get configuration from TFTP server
and need to specify the IP of TFTP
server and the file name of image.
switch(config)#restore flash:restore_cfg
upgrade flash:upgrade_fw G
Upgrade firmware by TFTP and need
to specify the IP of TFTP server and
the file name of image.
switch(config)#upgrade lash:upgrade_fw
3.1.15 SystemLog, SMTP and Event
Table 3.15: SysLog,SMTP,Event Commands Set
Netstar Commands Level Description Example
systemlog ip
[IP address] G Set System log server IP address. switch(config)# systemlog ip 192.168.1.100