What to do if …
Problem | Possible cause | Remedy |
The cooking zones will not | More than 10 seconds have | Switch the appliance on |
switch on or are not func- | passed since the appliance | again. |
tioning | was switched on |
|
| The child safety device is | Deactivate the child safety |
| switched on l | device (See the section |
|
| “Child safety device”) |
| Several sensor fields were | Only touch one sensor field |
| touched at the same time |
|
| The sensor fields are partly | Remove the cloth or the |
| covered by a damp cloth or | liquid. |
| with liquid | Switch the appliance on |
|
| again. |
| Safety | Switch the appliance on |
| triggered | again |
| STOP+GO is activated | Switching off STOP+GO |
The residual heat indicator | The cooking zone was only | If the cooking zone is sup- |
is not displaying anything | on for a short time and is | posed to be hot, call the |
| therefore not hot | Customer Service Depart- |
|
| ment. |
The automatic warm up | There is still residual heat | Let the cooking zone cool |
function is not switching | on the cooking zone h | down |
itself on | The highest heat setting is | The highest heat setting |
| ||
| set Ç | has the same power as the |
|
| automatic warm up func- |
|
| tion |
| The heat setting was set | 1. Switching off the cook- |
| using the sensor field | ing zone |
|
| 1. Set the cooking zone us- |
|
| ing the sensor field |
Acoustic signal sounds and | The On/Off sensor field has | Do not place any objects |
appliance switches itself on | been covered up, e.g. by a | on the control panel |
and then off again; after 5 | cloth |
|
seconds another acoustic |
|
|
signal sounds |
|
|
Display changes between | Power Management is re- | See section “Power Man- |
two heat settings | ducing the power of this | agement“ in the Operating |
| cooking zone | the Appliance chapter |
|
|
|
21