For Your Safety

Operating Safeguards

[ WARNING ]

If metal fragments or water gets into the printer, turn the printer off and unplug the printer immediately. Contact an authorized service representative. Operating the contaminated printer can cause fire or electric shock.

Do not open covers and do not attempt to repair the printer yourself. Contact an authorized service representative.

Do not alter the printer or modify any parts. Alteration or modification can cause fire or electric shock.

Do not place any liquids near the printer. Accidental spillage of liquid into the printer may cause severe damage. If this occurs, turn the printer off, unplug the power cord and contact an authorized service representative.

This product uses low frequency electromagnetic fields and can cause harmful interference to sensitive medical implant devices. If you have a cardiac pacemaker or implantable defibrillator, please consult your doctor for additional suggestion or advice.

Do not use the printer near medical instruments, which can cause improper operation.

Do not use the printer near automatic control machines (automatic doors, fire alarms, etc.). The electromagnetic fields can cause improper operation.

[ CAUTION ]

Do not insert hands inside the printer when closing the door or cover. Pinching a hand or finger may cause injury.

Do not touch hot or heated areas. Touching hot or heated areas may cause burns.

If the printer is dropped or damaged, turn the printer off and unplug the power cord. Otherwise, it may cause fire or electric shock.

Be sure to hold the media tray with both hands so that you do not drop it. The media tray weighs approximately 6.4 kg (14 lbs.) when it is fully loaded.

Ozone Release

[ WARNING ]

Make sure that the printer is installed in a well ventilated room so as not to increase density of ozone in the air. Since ozone is heavier than air, it is recommended that air at floor level be ventilated.

 

 

Your For

Waste Disposal

 

Safety

[ WARNING ]

 

 

 

Do not incinerate toner or toner containers. Toner dust

 

 

may cause flashback when exposed to an open flame.

 

 

Caution on Toner Use

[ CAUTION ]

Avoid ingestion, inhalation, eye or skin contact.

If ingestion occurs, drink several glasses of water to dilute stomach contents.

If inhalation occurs, remove to fresh air.

If skin contact occurs, wash thoroughly with soap and water.

If eye contact occurs, flush thoroughly with water.

In all cases, seek medical treatment if adverse symptoms occur.

When the toner cartridge is at the end of its life, do not dispose in fire.

Keep the toner cartridge out of children's reach. Store in a cool and dry place.

Black Toner

INGREDIENTS:

 

Carbon black (1333-86-4)

 

Silica (68909-20-6)

 

Charge control agent (31714-55-3)

 

Polyester resin (2 kinds)

 

 

Cyan Toner

INGREDIENTS:

Magenta Toner

Silica (68909-20-6)

Yellow Toner

Charge control agent (72869-85-3)

 

Polyester resin (2 kinds)

 

Wax (1 kind)

 

 

For USA only

Distributed by Panasonic Digital Document Company, Unit of Panasonic Corporation of North America Secaucus, NJ 07094

5