Agilent Technologies 664xA, 665xA, 667xA, 668xA, AGILENT Model 6653A: 3145A-00551, Model 6641A: 3217A-00111, Model 6645A: 3215A-00111, Model 6651A: 3130A-00171, Model 6652A: 3201A-00381, Model 6654A: 3148A-00391, Model 6655A: 3152A-00176, Model 6671A: 3129A-00218, Model 6672A: 3138A-00101, Model 6673A: 3138A-00101, Model 6674A: 3133A-00161, Model 6675A: 3138A-00101, Model 6680A: 3302A-00101, Model 6681A: 3250A-00101, Model 6682A: 3339A-00101, Model 6683A: 3339A-00161, Model 6684A: 3339A-00101

PRINTING HISTORY

The edition and current revision of this manual are indicated below. Reprints of this manual containing minor corrections

and updates may have the same printing date. Revised editions are identified by a new printing date. A revised edition

incorporates all new or corrected material since the previous printing date. Changes to the manual occurring between

revisions are covered by change sheets shipped with the manual. In some cases, the manual change applies only to specific

instruments. Instructions provided on the change sheet will indicate if a particular change applies only to certain

instruments.

Edition 2 - March, 1995

Reprinted - April 2000

This document contains proprietary information protected by copyright. All rights are reserved. No part of this document

may be photocopied, reproduced, or translated into another language without the prior consent of Agilent Technologies.

Information contained in this document is subject to change without notice.

DECLARATION OF CONFORMITY

according to ISO/IEC Guide 22 and EN 45014

Manufacturer’s Name: Agilent Technologies Inc.

Manufacturer’s Address: 140 Green Pond Road

Rockaway, New Jersey 07866

U.S.A.

declares that the Product

Product Name: Single Output System Power Supply

Model Number: Agilent 6680A, 6681A, 6682A, 6683A, 6684A

conforms to the following Product Specifications:

Safety: IEC 348:1978 / HD 401S1: 19811

EMC: CISPR 11:1990 / EN 55011:1991 - Group 1 Class A

IEC 801-2:1991 / EN 50082-1:1992 - 4 kV CD, 8 kV AD

IEC 801-3:1984 / EN 50082-1:1992 - 3 V / m

IEC 801-4:1988 / EN 50082-1:1992 - 0.5 kV Signal Lines

1 kV Power Lines

Supplementary Information:

The product herewith complies with the requirements of the Low Voltage Directive

73/23/EEC and the EMC Directive 89/336/EEC and carries the CE-marking accordingly.

Note 1: The product family was introduced prior to 12/93.

New Jersey January 1997

Location Date Bruce Krueger / Quality Manager

European Contact: Your local Agilent Technologies Sales and Service Office or Agilent Technologies GmbH,

Department TRE, Herrenberger Strasse 130, D-71034 Boeblingen (FAX:+49-7031-14-3143)