Connections (Continued)
Speaker System Connection
Connect the speakers using the supplied speaker cords.
To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).
Front speaker |
|
|
| Front speaker |
(Right) | Centre speaker | (Left) | ||
|
|
|
|
|
8 | 8 | 8 |
8 |
| 8 |
Surround speaker | Subwoofer | Surround speaker |
(Right surround) | (Left surround) |
Notes
Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to
If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
Do not disassemble the front covers of supplied speakers.
Speaker stand is optional.
About Ferrite Core
Be sure to attach the ferrite core to the speaker cables (for connecting to this unit).
This ferrite core can reduce noises.
How to attach the ferrite core
1Press the stopper [a] of the ferrite core to open.
2Wind the Center cable once on the ferrite core. Pass the others straight on the ferrite core.
3Close the ferrite core unitl it clicks.
Notes
Take care not to pinch the speaker cables between the ferrite cores.
Attach the ferrite core near the unit (Refer to the fig.3 and comment.).
1
2
3
a
8 
8 
8 
8 | 8 | The length here is |
short as much as possible.
14