User Documentation Addendum | show 802.1x |
|
|
|
|
Note. Verify the 802.1X port configuration using the show 802.1x command:
802.1x configuration for slot 1 port 13:
direction | = both, |
operational directions | = both, |
= auto, | |
= 60, | |
= 30, | |
= 30, | |
= 30, | |
= 2, | |
= 3600, | |
reauthentication | = no |
Guest Vlan ID | = 20, |
Supplicant polling retry count = 2
Optional. To display the number of 802.1x users on the switch, use the show 802.1x users command:
|
|
| |
Slot | MAC | Port | User |
Port | Address | State | Name |
3/1 | 00:60:4f:11:22:33 | Connecting | user50 |
3/1 | 00:60:4f:44:55:66 | Held | user51 |
3/1 | 00:60:4f:77:88:99 | Authenticated | user52 |
3/3 | 00:60:22:15:22:33 | N/A | |
3/3 | 00:60:22:44:75:66 | N/A | |
3/3 | 00:60:22:37:98:09 | N/A |
Optional. To display the number of
| ||
Slot | MAC | Vlan |
Port | Address | Learned |
3/1 | 00:61:4f:11:22:33 | 2 |
3/1 | 00:61:4f:44:55:66 | 2 |
3/1 | 00:61:4f:77:88:99 | 2 |
3/3 | 00:61:22:15:22:33 | 5 |
3/3 | 00:61:22:44:75:66 | 5 |
See the OmniSwitch CLI Reference Guide for information about the fields in this display.
New Section, page 22-7
The following section should be added to page
Release 5.1.6.R02 User Guide Supplement June 2005 | page |