ipv6 rip | IPv6 Commands |
|
|
|
|
ipv6 rip debug-level
Configures the RIPng debug level for all debug types. ipv6 rip
Syntax Definitions
level | Debug level. Valid range is 0 - 255. |
Defaults
parameterdefault
level | 0 |
|
|
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
•This command sets the debug level for all configured types. You cannot set different levels for each type.
•Use the ipv6 rip
•When the debug level is set to 0, the log is turned off.
Example
Release History
Release 5.1.6; command was introduced.
Related Commands
ipv6 rip | Configures the type of RIPng messages to debug. |
MIB Objects
alaRipngDebug alaRipngDebugLevel
page | Release 5.1.6.R02 User Guide Supplement June 2005 |