Using the 1:1 HDD Cruiser

Advanced Setup Menu

10-09 USB Auto-Link

This function sets the 1:1 HDD Cruiser to immediately enter USB mode on startup. This allows direct control of the unit from a PC.

1.Press and hold ESC for about three seconds to access the “Adv Setup” menu. The following screen will be displayed.

10. Adv Setup

ENT ESC

2.Use the arrow buttons (or) to select “USB Auto-Link”. The following screen will be displayed.

10-09. Adv Setup USB Auto-Link

ENT ESC

3.Press ENT to display the available options. The default is “OFF”.

USB Auto-Link

OFF

ENT ESC

4.Use the arrow buttons () to toggle the option “ON” or “OFF”. If set to “ON” the unit will immediately enter USB mode on startup.

USB L.H Mode D1:HDD D2:HDD

ENT ESC

www.aleratec.com43