Gas Requirements

Turn on gas and check all pipe connections (internal and external) for gas leaks with a non-corrosive detection fluid. Purge air in gas service line by operating the tumbler in the drying mode. If burner does not light and unit goes into lockout, open and close the door and restart. Repeat these steps until burner ignites. Use pipe compound, resistant to actions of L.P. Gas, on all pipe threads.

WARNING

Check all pipe connections, internal and external, for gas leaks using a non- corrosive leak detection fluid. To reduce the risk of explosion or fire, DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS! Gas connections should be checked twice a year for leakage.

W635

1

2

3

 

 

4

5

8

7

6TMB2007N

TMB2007N

1Gas Line to Tumbler Controls

2Shut-Off Valve

3Gas Supply Piping System

4Gas “T” Fitting

56 in. (152 mm) Minimum Gas Pipe

6Gas Pipe Cap

7Dirt and Water Vapor Trap

8Supply Pressure Tap

Figure 12

40

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

70269701