Alliance Laundry Systems Clothes Dryer 33

Step 4: Determine Proper Dryer

The direction of the arrow indicates which dryer is being used.

DRY2140N

Figure 33

Step 5: Set Fabric Selector

Select NORMAL for cottons, PERM PRESS for permanent press, DELICATE for sensitive items or FLUFF (NO HEAT) for items that require no heat.

NOTE: Always follow manufacturer’s care label instructions.

DRY2100N

Figure 34

Operation

Step 6: Start Dryer

Nonmetered Models

Rotate timer knob to desired time setting (up to

60 minutes). Press the PUSH-TO-START button.

IN USE light will come on (indicating start of cycle).

NONMETERED MODELS

DRY2101N

Figure 35

Coin Slide Models

Place coin(s) in slide and carefully push in as far as possible and then pull slide out as far as possible. After IN USE light comes on (indicating start of cycle), press the PUSH-TO-START button.

METERED MODELS

D363I

Figure 36

Remove knits when slightly damp because overdrying may cause shrinkage. Do not tumble dry knit woolens.

Should dryer stop before cycle is completed, the motor overload protector may have cycled. Refer to Maintenance section.

NOTE: This machine includes an extended tumble feature. Starting 20 minutes after a cycle ends, the cylinder will tumble for two minutes every hour without heat, up to 18 hours or until door is opened.

512686