Before You Start

Tools

For most installations, the basic tools you will need are:

1

2

3

54

D818I

1Wrench

2Screwdrivers

3Level

4Teflon Tape

5Duct Tape

Figure 1

NOTE: An 20.32 cm (8 in.) coin drawer is required for coin operated MDC and NetMaster models.

Installation

Additional Security

Torx security screws are available (as optional equipment at extra cost) for securing both lower access panels to each dryer base. Order Part No. 62853.

A Torx bit, Part No. 282P4, is available (as optional equipment at extra cost) for installing the Torx security screws.

A Torx bit holder, Part No. 24161, is available (as optional equipment at extra cost) to be used with the Torx bit.

WARNING

Any disassembly requiring the use of tools must be performed by a suitably qualified service person.

W299

512686

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

7