Roughing In Dimensions . . .
(Nonmetered Models)
7.0" | cm) |
|
|
(194.3 |
|
| |
(17.8 cm) |
|
| |
|
|
| |
| *76.5" | (114.8cm) |
|
| 7.7" |
|
|
| (19.6 cm) | *45.2" |
|
| 4.0" | 4.0" | |
|
| ||
| (10.2 cm) |
| (10.2 cm) |
23.5" | 28.0" |
| 26.9" |
(59.7 cm) | (71.1 cm) |
| (68.3 cm) |
*WITH LEVELING LEGS TURNED INTO BASE.
15.4" (39.1 cm)
D353IE2A
ELECTRIC MODELS
7.0" |
| cm) |
| (194.3*76.5" | |
(17.8 cm) |
| |
|
| |
| 7.7" |
|
| (19.6 cm) |
|
| 4.0" |
|
| (10.2 cm) |
|
23.5" | 28.0" |
|
(59.7 cm) | (71.1 cm) |
|
*WITH LEVELING LEGS TURNED INTO BASE.
*45.2" (114.8 cm)
| 15.4" | (110.5 cm) | ||
(10.2 cm) | 43.5" | |||
| 2.8" | |||
4.0" | (39.1 cm) |
| ||
| (7.1 cm) |
| ||
26.9" |
| 3/8" | ||
(68.3 cm) |
| NPT GAS | ||
| 2.3" CONNECTION | |||
| (6 cm) | D352IE2A | ||
GAS MODELS
NOTE: Side, rear and bottom exhaust openings are four inch (10.2 cm) ducting. Gas models cannot be vented out left side of cabinet because of burner housing.
IMPORTANT: The dryer should have sufficient clearance around it for needed ventilation and for the ease of installation and servicing. For maximum drying performance, we recommend that more clearance be allowed around the dryer than the clearances that are listed throughout this manual.
6 | 504524 |