Installation
Dimensional Clearances
Both single and multiple machine installations require specified minimum clearances on all sides of each machine. The table below shows these clearances.
See Figures 2 and 3 for dimensions of
Note: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or manufacturer. We reserve
the right to make changes at any time without notice.
Cabinet Freestanding
Recommended Minimum Clearances
|
| 18 |
| 25 |
| [in (mm)] | [in (mm)] | ||
|
|
|
|
|
Minimum rear clearance | 12 | (305) | 12 | (305) |
|
|
|
|
|
Minimum clearance between machine and wall | 2 | (50) | 2 | (50) |
|
|
|
|
|
Minimum clearance between machines (side) | 1 | (25) | 1 | (25) |
|
|
|
| |
Minimum front clearance | 16 | (406) | 17.5 (445) | |
|
|
|
|
|
14 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232060 |