Allied Telesis AlliedWare Plus - page 21

Page 21 | AlliedWare Plus™ OS: Overview of QoS
Counting packets for aggregate policers
If a packet is processed by an aggregate policer, it is counted in the output for every port that
the aggregate policer applies to, not just for the port that received the packet.
The following figure shows output for the example from "Applying aggregate policers to class
maps" on page 17.
For port
1 .0. 1 :
Interface: port1.0.1
Class-map: default
Aggregate Bytes: 0
Green Bytes: 0
Yellow Bytes: 0
Red Bytes: 0
Dropped Bytes: 0
Aggregate name: examplePolicer
Class-map: cmap1 cmap2 (port1.0.1)
cmap1 cmap2 (port1.0.2)
Aggregate Bytes: 0
Green Bytes: 0
Yellow Bytes: 0
Red Bytes: 0
Dropped Bytes: 0
For port 1 .0.2:
Interface: port1.0.2
Class-map: default
Aggregate Bytes: 0
Green Bytes: 0
Yellow Bytes: 0
Red Bytes: 0
Dropped Bytes: 0
Aggregate name: examplePolicer
Class-map: cmap1 cmap2 (port1.0.1)
cmap1 cmap2 (port1.0.2)
Aggregate Bytes: 0
Green Bytes: 0
Yellow Bytes: 0
Red Bytes: 0
Dropped Bytes: 0