Allied Telesis AT-8800, RAPIER I Show l2tp ip, Show l2tp tunnel, Proxy Authentication, Decode

Software Version 2.8.1 87

show l2tp ip

Syntax SHow L2TP IP

Figure 24: Example output from the show l2tp ip command

L2TP IP Range Information
------------------------------------------------------------
IP Range		192.168.1.2
PPP template		1
Sequence numbering	............	off
Pre-draft 13 support		off
ToS Reflect		off
Proxy Authentication		on
------------------------------------------------------------
Table 22: Parameters in the output of the show l2tp ip command
Parameter	Meaning
Proxy Authentication	Whether the router or switch, acting as an LNS, performs
	Proxy Authentication for the PPP user if the LAC provides
	Authentication information; one of “on” or “off”.

show l2tp tunnel

Syntax SHow L2TP TUNnel[=1..65535]

Figure 25: New option in example output from the show l2tp tunnel command

Tunnel ID	..................... 3
State	established
Started	..................... 08-Apr-2006 11:04:50
Debug	decode
.
.
.
Table 23: Parameters in the output of the show l2tp tunnel command
Parameter	Meaning
Debug	Whether debugging is “disabled” or enabled on the tunnel.
	If enabled, the type of debugging is displayed; one of
	“state”, “packet” or “decode”.

Software Version 2.8.1 C613-10477-00 REV B