TABLETOP SOLUTIONS
400-0434-0053

ABOUT YOUR Tilt 'N Plug Jr. 2

TILT ‘N PLUG JR.Designer Interconnect Solutions
All Tilt ‘N Plug Jr.’s belong to a family of compact
interconnection solutions designed for installation
into a table as part of a presentation system. They
are designed for mounting into a table, podium, or
other furniture to provide a way of connecting
audiovisual equipment on top of the furniture to a
presentation system below the furniture.
All use the same core element; a multimedia input
plate that can be "tilted" open when needed and
pushed closed when not needed.
The TNP122 and TNP142 each incorporate two
Tilt ‘N Plug Jr. modules and are operated
independently.The TNP142 is the same as a
TNP122,but with the modules factory-installed
facing in opposite directions. The TNP131 is the
same as a TNP121,but with a round bezel instead
of a square bezel.
All signals pass through the input plate directly to
cables on the underside of the table with no
intervening circuitry. The use of additional
ALTINEX Signal Management Solutions®such as
computer video interfaces, distribution amplifiers,
and switchers may be desirable.
The input plate ofthe Tilt ‘N Plug Jr. is accessible
by pushing down on the top cover. The unit then
auto-tiltsopen with help from an internal
pneumatic spring. Once open, the input plate
remains securely in place. The input plate is
hidden by pressing down on the top cover until the
latching mechanism engages. In its closed
position, the top panel lies flush with the tabletop,
held in place by the latching mechanism.
All Tilt ‘N Plug Jr. Signal Management Solutions
come with a standard top and bezel offering a high
quality matte black finish. Other finishes or special
bezel configurations are available upon request.
Please contact an ALTINEX representative to
discuss custom options.

TECHNICAL SPECIFICATIONS 3

Specifications are subject to change.
See www.altinex.com for up-to-date information.
FEATURES/
DESCRIPTION TNP121/121C/131
PASS-THROUGH
AC Power 10 ft (3 m)
110 VAC, 60 Hz, 5 ANEMA F-M
Audio, Video, and
Communication *6ft (2 m)
Computer Video 15-pin HD F-M (1)
Stereo Audio 3.5 mm F-M (1)
Network RJ-45 F-M (1)
Modem RJ-11 F-M (1)
Accessories Included
Hardware -Mounting screws and
brackets
-Cable clamps/screws
Table 1. TNP121/121C/131 General
FEATURES/
DESCRIPTION TNP122/142
PASS-THROUGH
AC Power 10 ft (3 m)
110 VAC, 60 Hz, 5 ANEMA F-M
(2 female to 1 male)
Audio, Video, and
Communication 6ft (2 m)
Computer Video 15-pin HD F-M (2)
Computer Audio 3.5mm F-M (2)
Network CAT-6 (RJ-45) F-M (2)
Modem RJ-11 F-M (2)
Accessories Included
Hardware -Mounting screws and
brackets
-Cable clamps/screws
Table 2. TNP122/142 General
*
Customizable on the TNP121C