CT ExprEss sTEp by sTEp opEraTion MANUAL • 40
cLEANING & MAINTENANcE
clEaning schEdulE
daily gaskET clEaning
It is important to prolong the life of the oven gasket
by cleaning on a daily basis. Routine cleaning will
help protect the gasket from deterioration caused by
acidic foods.
1. Allow the oven to cool, then wipe the gasket
and crevices with clean cloth soaked in warm
detergent solution.
2. Wipe the gasket and crevices with a cloth and clean
rinse water.
Do not attempt to remove gasket or place
in the dishwasher.
probE usagE and clEaning
After each use of the corE TEmp mode, wipe the probe
tip with a clean paper towel to remove food debris. Follow
by wiping the probe with a disposable alcohol pad. Return
the probe to the proper door bracket position.
probe cleaning procedures
1. Remove all food debris from probe between loads and
at the end of each production shift. Wipe the entire
probe, probe cable assembly, and probe holding bracket
with a clean cloth and warm detergent solution.
2. Remove detergent by wiping the probe, cable, and
bracket with a cloth and clean rinse water.
3. Wipe probe and probe bracket with disposable alcohol
pad or sanitizing solution recommended for food
contact surfaces.
4. Allow probe and cable to air dry in the probe
holding bracket.
5. Wipe the probe with a disposable alcohol pad prior to
inserting into a new food product.
daily ovEn clEaning
To be performed at the end of the production day or
between production shifts.
monThly clEaning
1. Spray Head
2. Water Intake Filters
3. Drain Pipe
DANGEr
AT NO TIME SHOULD THE INTERIOR
OR EXTERIOR BE STEAM CLEANED,
HOSED DOWN, OR FLOODED WITH
WATER OR LIQUID SOLUTION OF
ANY KIND. DO NOT USE WATER JET
TO CLEAN.
sEVErE DAMAGE or
ELEcTrIcAL hAZArD
couLD rEsuLT.
WARRANTY BECOMES VOID IF
APPLIANCE IS FLOODED
HAND SPRAYER
VALVE REQUIRES
"Y" HOSE SPLITTER
3/4" G
1-1/2" DRAIN
WATER INLET
CLEAN-OUT
TANK
2
1
3