2-7-1 Basic Wireless Settings
Please click ‘Wireless’ menu on the left of web management interface, then click ‘Basic Settings’, and the following message will be displayed on your web browser:
1
2
3
4
This wireless router can be work in 6 modes:
A.AP: Standard wireless AP (access point).
B.Station-Infrastructure: Configure the router to Ethernet device such us TV, Game player, HDD&DVD to enable the Ethernet device be a wireless station.
C. AP Bridge-Point to Point: Connect this router with another wireless router, to expand the scope of network.
D. AP Bridge-Point to Multi-Point: Connect this router with up to four other wireless routers, to expand the scope of network.
E. AP Bridge-WDS: Connect this router with up to four WDS-capable wireless routers, to expand the scope of network.
F. Universal Repeater: The router can act as Station and AP at the same time. It can use Station function to connect to a Root AP and use AP function to service all wireless stations within its coverage.
NOTE: For ‘AP Bridge-Point to Point’ and ‘AP Bridge-Point to Multi-Point’ mode, wireless router is operated in wireless bridge dedicated mode – wireless router is only used to expand the scope of network, and no wireless clients will be accepted. If you want to use your wireless router to expand the scope of network, and also accept wireless clients, please select ‘AP Bridge-WDS’ or ‘Universal Repeater‘ mode.
Please select a proper operation mode you want to use from ‘Mode’ dropdown menu, and continue on other operation mode specific settings:
AP Station-Infrastructure AP Bridge-Point to Point
AP Bridge-Point to Multi-Point AP Bridge-WDS
Universal Repeater
-Please go to section 2-7-1-1
-Please go to section 2-7-1-2
-Please go to section 2-7-1-3
-Please go to section 2-7-1-4
-Please go to section 2-7-1-5
-Please go to section 2-7-1-6