3.You can hide the ESSID of this router by set ‘Broadcast ESSID’ option to ‘Disable’. Your wireless router will not be found by other people in proximity if they’re just using the AP scanning function of their wireless client, and this can reduce the chance of being intruded.

4.Use ‘Access Control’ function described in section 2-7-4, so those people who are not in your list will not be able to connect to your network.

CHAPTER III: ADVANCED FUNCTIONS

3-1 Quality Of Service (QoS)

Quality of service provides an efficient way for computers on the network to share the internet bandwidth with a promised quality of internet service. Without QoS, all computers and devices on the network will compete with each other to get internet bandwidth, and some applications which require guaranteed bandwidth (like video streaming and network telephone) will be affected, therefore an unpleasing result will occur, like the interruption of video / audio transfer.

With this function, you can limit the maximum bandwidth or give a guaranteed bandwidth for a specific computer, to avoid said unpleasing result from happening.

3-1-1 Basic QoS Settings

Please click ‘Qos’ menu on the left of web management interface and the following message will be displayed on your web browser:

1

2

3

 

 

 

 

 

 

4

5

6

7

8

9

10

11

Enable QoS (1):

 

Check this box to enable QoS function, unselect this box if you don’t want to enforce QoS

 

 

 

bandwidth limitations.

 

Total Download Bandwidth (2):

You can set the limit of total download bandwidth in kbits. To disable download bandwidth

 

 

 

limitation, input ‘0’ here.

 

Total Upload Bandwidth (3):

You can set the limit of total upload bandwidth in kbits. To disable upload bandwidth

 

 

 

limitation, input ‘0’ here.

 

Current QoS Table (4):

 

All existing QoS rules will be displayed here.

Add (5):

 

 

Click ‘add’ button to add a new QoS rule, see section 3-1-2 ‘Add a new QoS rule’ below.

Edit (6):

 

 

If you want to modify the content of a specific rule, please check the ‘select’ box of the rule

 

 

 

you want to edit, then click ‘Edit’ button. Only one rule should be selected a time! If you

 

 

 

didn’t select a rule before clicking ‘Edit’ button, you’ll be prompted to add a new rule.

49