Configuration utility will scan for all wireless access points automatically. Please check if the wireless access point with the SSID (the name of wireless access point) you preferred is shown here.
If the wireless access point you wish to connect does not show here, please click ‘Rescan’ to try again, until the one you preferred is displayed. You may have to click ‘Rescan’ for more than two times before you can see the access point you wish to use here sometimes.
If you still can not see the access point you wish to use after clicking ‘Rescan’ for more than five times, please move your computer closer to the location where the wireless access point is.
If you wish to see detailed information for a specific access point, please
If the wireless access point you wish to connect is found, click the wireless access point or network device you wish to connect, it will be highlighted, then click ‘Connect’.
If the access point you selected does not use encryption, you’ll be connected to this wireless access point within one minute.