American Audio 4295

Model: Q-D5, Professional 2 Channel Preamp Mixer

POWER SUPPLY: AC 115/230V, 50/60Hz Selectable

DIMENSIONS: 10”W x 12.25”D x 3.25”H /254 x 308 x 82.5 mm

WEIGHT: 6.5 Lbs. / 3 Kg

CROSSFADER: Feather Fader Plus - VCA detecting fader start control -

Low grounding impedance crossfader

POWER CONSUMPTION: 5W typical, 7W w/ full headphone output

HEADPHONE IMPEDANCE: 16 Ohms

ENVIRONMENTAL CONDITION: Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85%

RH (non-condensing); Storage Temperature: -20 to 60 ˚C

Input Sensitivity (Level/Impedence): LOAD=47K OHM

LINE: 14dB (200mV)/30K Ohm ±2dB

PHONO: -50dB (3mV)/47K Ohms ±3dB

MICROPHONE: -54dB (2mV) /6K Ohms ±3 dB

AUX: -14dB (200mV)/47K Ohms ±2dB

Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms, LOAD=47K OHM

MASTER OUT (RCA): 0dBV (1V)/1K Ohm ±2dB

REC OUT (RCA): -10dB (316mV)/1K Ohm ±3dB

PHONES (LOAD=32 OHMS): -3dB (0.7V)/33 Oms ±3dB

Maximum Output (Load = 47K, THD = 5%)

MASTER (RCA): MORE THAN 18dB (8V)

REC: MORE THAN 18dB (8V)

PHONES (Load=32 ohms): MORE THAN 5dB (1.7V)

CHANNEL BALANCE: Within 3dB

Frequency Response:

LINE: 20Hz - 20KHz, +2/-3dB

PHONO: 20Hz - 20KHz, +2/-3dB

AUX: 20Hz - 20KHz, +2/-3dB

MICROPHONE: 20Hz - 20KHz, +2/-3dB

Output Noise (IEC-A WEIGHTED):

LINE/AUX: LESS THAN -68dB

PHONO: LESS THAN -65dB

MIC: LESS THAN -58dB

THD - Total Harmonic Distortion (1Khz, 0dB Output):

MASTER OUTPUT (LOAD = 47K OHMS): Less than 0.08%

PHONO: (LOAD = 32 OHMS): Less than 0.15%

CROSS TALK: < 55dB @ 1Khz between left and right channels

Channel Equalizer:

BASS: +12 ±3dB / Less Than -19dB at 70Hz

MID: +12 ±3dB / Less Than -14dB at 1KHz

TREBLE: +13 ±3dB / Less Than -24dB at 13KHz

Microphone Equalizer:

BASS: ±12, ±2dB at 100KHz

TREBLE: ±12, ±2dB at 10KHz

Q-D5™ Specifications