American Audio Pocket Record

POCKET RECORD DElETING TRaCKS

DElETING TRaCKS:

You can delete your recorded les via computer or using Pocket Record itself. To delete the your

les using the Pocket Record, select the track you want to delete, press MODE/STOP button and

then press DEL/A-B button, the LCD will show “dEL”. Press the DEL/A-B again, and the Pocket Re-

cord will start to delete the track. When the track has been deleted the LCD will show “DELETE” and

the clock return to 00:00:00. This means the track is empty and you can now save a new recording.

POCKET RECORD TRaNSFERRING FIlES

The device can be connected to computer, to copy and store your recorded les onto your computer

(to backup your data), or download/transfer music from your computer to the Pocket Record.

Connect one end of the USB cord to the port of the Pocket Record and the other end of cord to

USB port on your computer.

Once connected to your computer, the computer will detect the Pocket Record as two removable

disks/hard drives (the rst disk/hard drive represents the built-in ash memory; the second disk/hard

drive represents the SD card memory). In each disk/hard drive you will nd folders for Groups 1–9.

The music you download from your computer to the Pocket Record will be stored in FOLDER 2, and

the track number will depend on the sequence in which the les are transferred. This means that

the track number in FOLDER 2 is not xed and can be changed at any time if a track is deleted or

added.

If you want the les to have a xed track number, you can store the music in FOLDER 1. To do this,

you simply need to change the le names. Follow the instructions below to store les in FOLDER 1.

a) If you want to download les to FOLDER 1, and store them in the built in ash memory, with a

xed track number, change the le name to M_InT_xx (xx is whatever track number you want it to

be).

b) If you want to download les to FOLDER 1, and store them to a SD memory card, with a xed

track number, change the le name to M_EXT_xx (xx is whatever track number you want it to be).

The same way you connect to a wall outlet to power your Pocket Record you can power the Pocket

Record off of a computer.

Once you have connected to the computer, press the MODE/STOP button once, the Pocket Record

will now enter the operating mode, and now you can operated the Pocke Record with the power of

the computer.

You can leave the operating mode by pressing the MODE/STOP button for 2 seconds.