American Audio Portable Audio Recorder

POCKET RECORD RECORDING CONT.

RECORDING TO BUIlT IN & ExTENSION MICROPhONES:

1. The Pocket Record is equipped with two built-in microphones.You can adjust sensitivity level of

the built-in microphones using the built-in MICROPhONE SENSITIVITY SELECTOR (12). The high

sensitivity level of the built-in microphone is -45dB (at 1Khz), while the low sensitivity level is

-35dB (at 1KHz). You may also adjust the AUDIO IN VOLUME CONTROL (7 & 8) to make slight vol-

ume adjustment.

2. There are two Audio-in jacks for the Pocket Record a left and a right (9 & 10). They allow you to

plug two extension microphones into the jacks for recording. If you use an extension microphone

you must put the AUDIO IN SELECTOR switch (11) in the microphone “M” position. The two AU-

DIO-In jACKS (9 & 10) both provide DC 1.5V power. You may use either the built in microphones or

extension microphones as recording sources. When using extension microphones you may adjust

the AUDIO IN VOLUME CONTROL knobs (7 & 8) for a proper recording sound level.

3. The recording source of the built-in microphones and the extension microphones will be mixed

into two separate tracks (Left and Right channels) with a balanced level.

4. You can turn off the built-in microphones when recording using another source. Simply, switch the

MICROPhONE SENSITIVITY SELECTOR (12) to the OFF positions.

RECORD FROM ElECTRIC GUITaR OR lINE IN:

1. The Pocket Record allows you to plug in an electric guitar as recording source. When using an

electric guitar you must put the AUDIO IN SELECTOR switch (11) in the Guitar “G” position. When

using an electric guitar you may adjust the AUDIO IN VOLUME CONTROL knobs (7 & 8) for a proper

recording sound level.

2. The Pocket Record allows you to plug in a line-in source such as a CD player, tape deck, radio,

etc as a recording source. When using a line in source you must put the AUDIO IN SELECTOR

switch (11) in the Line In “L” position. When using a line in source you may adjust the AUDIO IN

VOLUME CONTROL knobs (7 & 8) for a proper recording sound level.

3. The recording source of the built-in microphones and the electric guitar or line in recording source

will be mixed into two separate tracks (Left and Right channels) with a balanced level.

4. You can turn off the built-in microphones when recording using another source. Simply, switch the

MICROPhONE SENSITIVITY SELECTOR (12) to the OFF positions.