American Audio Q-2422 MKII

TECHNICAL SPECIFICATIONS

Model: Q-2422 MKII 3 Channel Mixer

POWER SUPPLY: AC 115v~60Hz/230v50~60Hz, User Selectable

DIMENSIONS: 482.6mm (W) x 177mm (D) x 97mm (H)

WEIGHT: 7.49 Lbs. / 3.4Kgs.

CROSSFADER: Feather Fader Plus - VCA detecting fader start control -

Low grounding impedance crossfader

POWER CONSUMPTION: 12W typical, 20W w/ full headphone output

HEADPHONE IMPEDANCE: 16 Ohms

OPERATING TEMPERATURE: 5 to 35 deg. C; Humidity: 25 to 85% RH

(non-condensing); Storage Temperature: -20 to 60 deg. C

Input Sensitivity (Level/Impedence): Note: 0dBV output, load = 100K OHM

LINE, AUX: 10K OHM / -14dBV (200mV) +/-2dB

PHONO: 47K OHM / -54dBV (2mV) +/-2dB

MICROPHONE 1: 2.2K OHM / -54dBV (2mV) +/-2dB

MICROPHONE 2: 2.2K OHM / -60dBV (1mV) +/-2dB

Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms

MASTER: 300 OHM

ZONE: 1K OHM / 0dBV (1V) +/-2dB

MASTER OUT (XLR): 600 OHM / +2.21dBV (1V) +/-2dB

REC OUT (RCA): 2.2K OHM / -10dBV (316mV) +/-2dB

PHONES: (LOAD=32 OHMS) 33 OHM / dBV (1mV) +/-2dB

Maximum Output: (LOAD = 47K, THD = 1%)

MASTER/ZONE: MORE THAN +18 dBV (8.0V)

PHONES: (LOAD=32 ohms) MORE THAN +4dBV (1.6V)

CHANNEL BALANCE: WITHIN 3dB

Frequency Response:

LINE/AUX: 20 - 20KHz +/-2dB

PHONO: 20 - 20KHz +2 /-3dB (RIAA)

MICROPHONE: 20 - 20KHz +2 /-3dB

Noise: (maximum output) JIS-A weighted

LINE/AUX: LESS THAN -90dBV

PHONO: LESS THAN -66dBV

MIC 1: LESS THAN -64dBV

MIC 2: LESS THAN -60dBV

THD - Total Harmonic Distortion: (MASTER = 0dBV OUTPUT, w/ 20KHz LPF):

LINE: LESS THAN 0.02% 20 - 20KHz

CROSS TALK: (MASTER = 0dBV OUTPUT)

LINE: MORE THAN 60dB AT 1KHz BETWEEN L AND R

MORE THAN 70dB AT 1KHz BETWEEN CHANNELS

Channel Equalizer:

BASS: +12 +/-2dB at 70Hz

Below -27dB at 70Hz

MID: +12 +/-2dB at 1KHz

Below -27 at 1KHz

TREBLE: +12 +/-2dB at 13KHz

-14 +/-3dB at 13KHz

Microphone Equalizer:

BASS: +12 +/-2dB at 100Hz, -22 +/-3dB at 100Hz

TREBLE: +12 +/-2dB at 10KHz, -15 +/-3dB at 10KHz

TALKOVER: - 14 dB +/- 2dB