Model: Q-d5 MKII, Professional 2 Channel Preamp Mixer
PoWEr SUPPLY: AC 115/230V, 50/60Hz Selectable
DIMENSIoNS: 10”W x 12.25”D x 3.25”H /254 x 308 x 82.5 mm
WEIgHt: 8.5 Lbs. / 3.8 Kg
CroSSFADEr: Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
PoWEr CoNSUMPtIoN: 15W typical, 21W w/ full headphone output
HEADPHoNE IMPEDANCE: 16 Ohms
ENVIroNMENtAL CoNDItIoN: Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85%
RH (non-condensing); Storage Temperature: -20 to 60 ˚C
Input sensitivity (Level/Impedence): LoAD=47K oHM
LINE: 14dB (200mV)/30K Ohm +2/-3dB
PHoNo: -50dB (3mV)/47K Ohms ±3dB
MICroPHoNE: -54dB (2mV) /6K Ohms ±3 dB
AUX: -14dB (200mV)/47K Ohms +2/-3dB
Output sensitivity (Level/Impedence): note: 0dbv=1vrms, LoAD=47K oHM
MAStEr oUt (rCA): 0dBV (1V)/1K Ohm ±2dB
rEC oUt (rCA): -10dB (316mV)/1K Ohm ±3dB
PHoNES (LoAD=32 oHMS): -3dB (0.7V)/33 Oms ±3dB
Maximum Output (Load = 47k, thD = 5%)
MAStEr (rCA): MORE THAN 18dB (8V)
rEC: MORE THAN 8dB (2.5V)
PHoNES (Load=32 ohms): MORE THAN 5dB (1.7V)
ChanneL baLanCe: Within 3dB
Frequency response:
LINE: 20Hz - 20KHz, +2/-3dB
PHoNo: 20Hz - 20KHz, +2/-3dB
AUX: 20Hz - 20KHz, +2/-3dB
MICroPHoNE: 20Hz - 20KHz, +2/-3dB
Output noise (IeC-a WeIGhteD):
LINE/AUX: LESS THAN -68dB
PHoNo: LESS THAN -65dB
MIC: LESS THAN -58dB
thD - total harmonic Distortion (1khz, 0db Output):
MAStEr oUtPUt (LoAD = 47K oHMS): Less than 0.08%
PHoNo: (LoAD = 32 oHMS): Less than 0.15%
CrOss taLk: < 55dB @ 1Khz between left and right channels
Channel equalizer:
bASS: +12 ±3dB / Less Than -19dB at 70Hz
MID: +12 ±3dB / Less Than -14dB at 1KHz
trEbLE: +13 ±3dB / Less Than -24dB at 13KHz
Microphone equalizer:
bASS: ±12, ±2dB at 100KHz
trEbLE: ±12, ±2dB at 10KHz
Q-D5 MKII™ Specifications
©American Audio® - www.AmericanAudio.us - Q-D5 MKII™ Instruction Manual Page 15