User Instructions
American DJ® - www.americandj.com - DJ Scan 250 EX™ Instruction Manual Page 2
Unpacking: Thank you for purchasing the DJ Scan 250 EX™ by
American DJ®. Every DJ Scan 250 EX™ has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your x-
ture for any damage and be sure all equipment necessary to operate
the unit has arrived intact. In the event damage has been found or parts
are missing, please contact our toll free customer support number for
further instructions. Please do not return this unit to your dealer with-
out contacting customer support rst.
Introduction: The DJ Scan 250 EX™ is a five channel, DMX intelligent
fixture. The fixture can used in three different operating modes; stand
alone, Master/Slave configuration, or DMX controlled. The DJ Scan
250 EX™ can be used as a stand alone sound active fixture or used
in multiples linked in a master/slave configuration. For best results use
fog or special effects smoke to enhance the beams projections.
Customer Support: American DJ® provides a toll free customer
support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Warning! This may cause severe eye damage. Avoid looking di rectly
into the light source at all times!
DJ Scan 250 EX™ General Information
American DJ®
6122 S. Eastern Ave.
Los Angeles Ca. 90040
www.americandj.com
Rev. 3/08