American DJ 250HP user manual

User InstructionsAmerican DJ

DJ Scan 250HP™ Introduction

©American DJ Supply® - www.americandj.com - DJ Scan 250HP™ User Manual Page 2

Introduction: Congratulations and thank you for purchasing the DJ

Scan 250HP™ by American DJ®, one of the finest pieces of its kind

on the market today! The DJ Scan 250HP™ is a great inexpensive,

light weight, intelligent fixture. Due to it’s physical specifications, it’s a

great piece for mobile DJ’s, roller rinks, small clubs, bars, and bowling

centers. When used in multiples of two or more, these units create an

effect that rivals that of units that can cost up to three times the price.

The DJ Scan 250HP™ was designed to run in a Master/Slave mode

but can be used with any universal DMX-512 controller.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set-up and installation help and to answer any

question should you encounter problems during your set up or initial

operation. You may also visit us on the web at www.americandj.com

for any comments or suggestions. Toll free customer service hours are

Monday through Friday 9:00 a.m. to 5:30 p.m. Paciﬁc Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: support@americandj.com

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ® customer support.

Please recycle the shipping carton when ever possible.

Improvements and changes in speciﬁcations and design to this

manual and unit may be made at any time without prior notice.

This fixture is fitted with a halogen lamp which is highly susceptible to

damage if improperly handled. Never touch the lamp with your bare

fingers as the oil from your hands will shorten the lamp life. Never

install, mount, or place this fixture in areas prone to heavy vibration.

Also, never move the fixture until the lamp has had ample time to

cool. Remember, lamps are not covered under warranty conditions.

Rev. 2/06