IMPORTANT

•Allow base to reach room temperature before installation.

•Before you begin, locate appropriate product reference (see page 1).

•Read installation instructions carefully before starting project.

•Keep instructions for warranty information

RECOMMENDED TOOLS AND MATERIALS

Tape Measure

Pencil

Saber Saw

Personal Safety Equipment

Mortar Mix (optional)

Drill

24" Level

Screws, 1" Flathead, Stainless

INSTALLATION INSTRUCTIONS

STEP 1. PREPARING ALCOVE

• Strip alcove to bare studs.

• Alcove studs should be constructed as shown above.

• Floor must be clean, smooth, and level (check with level). Sub floor must be installed. Do not install shower base on open floor joists.

• Cut hole in sub floor as shown on page 1 to accommodate drain.

STEP 2. INSTALLING BASE

• Trial fit base in prepared alcove. With base sitting flat on floor, check with level

FIGURE 1. Check to assure base is level.

on top of base. Base should be level from front-to-back and side-to-side (Fig 1).

 

If base is not level, remove base and level floor using leveling compound.

 

•A floor leveling compound (smooth mortar) or a similar quick-setting compound specifically made for leveling floors may be used to fully support and level base.

•After base is leveled, if alcove is larger than base, shim between base and studs to create a tight fit. Screw base flange to studs (Fig. 2).

CLEANING

•Do not use any abrasive cleaners or metal scrapers.

•If drywall mud or plaster gets on your shower, it may be carefully removed with a wooden scraper made from a piece of scrap wood.

•Adhesive may be removed with mineral spirits.

•Ideal cleaners are Soft Scrub Gel® or Comet Gel®.

FIGURE 2. If necessary, shim between base and studs for tight fit and screw to each stud.

WARNING: Some cleaning products are not suitable for use. Read all labels carefully.

DO NOT USE if they say “not suitable for use with ABS, acrylic or polystyrene”.

-2-

754285-100 Rev. A

Page 1 Page 3
Page 2
Image 2
American Standard 3232Y1.ST.XXX, 4834Y1.ST.XXX, 3838Y1.DT.XXX Installation Instructions, Cleaning, Preparing Alcove
Page 1 Page 3

6032Y1.ST-R.XXX, 6032Y1.ST-C.XXX, 6032Y1.ST-L.XXX, 3636Y1.ST.XXX, 3838Y1.NEO.XXX specifications

American Standard is renowned for its commitment to quality and innovation in the bathroom and kitchen fixtures market. Among their diverse product line, the models American Standard 3232Y1.ST.XXX, 6032Y1.ST-R.XXX, 4834Y1.ST.XXX, 3636Y1.ST.XXX, and 6032Y1.ST-L.XXX stand out for their superior design and functionality.

The American Standard 3232Y1.ST.XXX model is a high-quality shower base that provides a spacious, inviting area for daily relaxation. Its modern design features a slip-resistant surface, ensuring safety while showering. The model is made from durable acrylic, which not only enhances its aesthetic appeal but also offers excellent resistance to chipping, cracking, and discoloration over time.

In a similar vein, the 6032Y1.ST-R.XXX is a luxurious alcove bathtub designed for comfort and elegance. Its generous size allows for a full-body soak, making it an ideal choice for those looking to unwind in style. The tub incorporates a deep design that promotes water retention and heat conservation, ensuring a calming experience. The smooth, easy-to-clean surface adds to its appeal, making maintenance a breeze.

The 4834Y1.ST.XXX model takes a more compact approach with a corner design that maximizes space in smaller bathrooms. This model is perfect for urban dwellings or cozy en-suites, providing both functionality and comfort. Its ergonomic shape is designed to promote relaxation while also being accessible for users of various ages and abilities.

The 3636Y1.ST.XXX is another exceptional offering, showcasing a square shower base that combines modern aesthetics with practicality. This model is ideal for those seeking an open, contemporary look in their bathrooms. The low-profile design ensures easy entry and exit, while the integrated drain promotes efficient water flow.

Lastly, the 6032Y1.ST-L.XXX model is a left-hand drain bathtub that emphasizes versatility and convenience. It allows for flexible installation options in various bathroom layouts, catering to individual needs and preferences. Like other models, it emphasizes ease of cleaning and maintenance, ensuring longevity and continued performance.

All these models incorporate the latest technology in bathroom fixtures, ensuring durability, safety, and comfort. American Standard’s commitment to environmental sustainability is also evident, as many of their products are designed to conserve water and energy. In summary, these models from American Standard merge high-quality materials with thoughtful design to enhance any bathing space.
Top Page Image Contents