American Standard 6032 Series TUB installation instructions ROUGH-IN INFORMATION 6032 SERIES TUB

INSTALLATION INSTRUCTIONS

6032 SERIES TUB

6032 SERIES SEATED SHOWER BASE

HIGH GLOSS ACRYLIC SURFACE

Thank you for selecting American Standard...the benchmark of fine quality for over 100 years.To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

BEFORE YOU BEGIN....

Local building codes vary by location. Observe all local plumbing and building codes. Your new bath is shipped to you after careful inspection.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

TOOLS & MATERIALS REQUIRED
TOOLS:				MATERIALS:
•	Level	•	Screw Driver	•	Nails
•	Square	•	Standard Woodworking Tools	•	Plumber’s Putty
• Tape Measure		•	Personal Safety Equipment	•	Silicone Sealant
•	Pipe Wrench	•	Caulking Gun	•	1 x 3 or 2 x 4 Stringers
•	Slip Joint Pliers			•	Drop Cloth
				•	Mortar Mix or Grout

NOTE: Take extra care in handling surfaces of the bath. Use only non-abrasive cloths to avoid scratching.

U S E

ROUGH-IN INFORMATION: 6032 SERIES TUB

	60"
9-3/4"	(1524mm)	3-3/16"
(248mm)		(81mm)
15-5/8"
(397mm)
32"		4-1/16"	(103mm)
(813mm)
3-3/16"
(81mm)
	3-15/16"
2" (51mm)	(100mm)
C/L OF DRAIN	3"	1"
	(76mm)	(25mm)
17-3/4"
(451mm)		18"
STRINGER
		(457mm)
HEIGHT

GENERAL SPECIFICATIONS FOR 6032 TUB

INSTALLED SIZE					60 x 32 x 18 In.
			(1524 x 813 x 457mm)
WEIGHT							60 Lbs. (27 Kg)
WEIGHT w/WATER				493 Lbs.(224 Kg)
GAL. TO OVERFLOW						52 Gal. (197 L)
BATHING WELL AT SUMP		22 x 44.5 In. (559 x 1130mm)
BATHING WELL AT RIM			25 X 53 In.(635 x 1346mm)
WATER DEPTH TO OVERFLOW						12 In. (305mm)
FLOOR LOADING	37 Lbs./Sq.Ft. (181 Kgs/Sq.m)
(PROJECTED AREA)
PTS.									27.5
CUBE (FT3)								28.9

ROUGH-IN INFORMATION:

6032 SERIES SEATED SHOWER BASE

		60"
	8"	(1524mm)	1-3/8"
	(203mm)		(35mm)
	14-7/8"			15-5/8"
	(378mm)			(397mm)
				31-1/4"
				(794mm)
				25-5/8"
				(651mm)
	1-1/8"	3-1/2"		1-1/8"
	(29mm)	(89mm)		(29mm)
			1"
			(25mm)		HT.
(476mm)3/4"-18	HEIGHTSTRINGER			(127mm)5"
			15-5/16"		THRESHOLD
			(389mm)
			SEAT HT.
		19"
		(483mm)

GENERAL SPECIFICATIONS FOR 6032 SHOWER BASE

INSTALLED SIZE			60 x 32 x 19 In.
		(1524 x 813 x 483mm)
WEIGHT				60 Lbs. (27 Kg)
WEIGHT w/WATER						N/A
GAL. TO OVERFLOW						N/A
BATHING WELL AT SUMP						N/A
BATHING WELL AT RIM						N/A
WATER DEPTH TO OVERFLOW						N/A
FLOOR LOADING	<15 Lbs./Sq.Ft. (<75 Kgs/Sq.m)
(PROJECTED AREA)
PTS.					27.5
CUBE (FT2)					29.4

S A V E F O R F U T U R E

All product names listed herein are trademarks of AS America, Inc. unless otherwise noted.	754731-100 Rev. D
© AS America, Inc. 2012