Flip-Top Instructions:

So you’ve made it this far and you are now ready to flip your lid...or at least the amp. We will instruct you on how to do the latter, as we are not in the business of lid-flipping!

It is accomplished in five simple steps:

Step 1: loosen the latches on each side of the cabinet. There are two latches on each side, four total.

Step 2: using the handle, lift the top of the cabinet (amplifier is attached underneath) and rotate it 180˚ clockwise (as indicated in the middle drawing below).

Step 3: set the cabinet top handle-side down on the top of the cabinet. The amplifier should now be on the top, right- side up, with the front of the amp and the front of the cabinet facing the same direction.

Step 4: line up and lock all four latches.

Step 5: rock out like there is no tomorrow!

www.ampeg.com

©2011 LOUD Technologies Inc.

16220 Wood-Red Road NE • Woodinville, WA 98072

Part No. SW0855 Rev. E 01/11