AMX MVP-5200i manual Tec, Tef, Effect names, Txt

	Programming
"^" Button Commands (Cont.)
^TEC	The Text Effect is specified by name and can be found in TPD4. You can also assign the
Set the text effect	color by name or RGB value (RRGGBB or RRGGBBAA).
	Syntax:
color for the
specified	"'^TEC-<vt addr range>,<button states range>,<color value>'"
addresses/states
	Variable:
to the specified
color.	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	color value = Refer to the RGB Values for all 88 Basic Colors table on page 107.
	Example:
	SEND_COMMAND Panel,"'^TEC-500.504&510.515,1&2,12'"
	Sets the text effect color to Very Light Yellow on buttons with variable text 500-504
	and 510-515.
^TEF	The Text Effect is specified by name and can be found in TPD4.
Set the text effect.	Syntax:
	"'^TEF-<vt addr range>,<button states range>,<text effect name>'"
	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	text effect name = Refer to the Text Effects table on page 133 for a listing of text
	effect names.
	Example:
	SEND_COMMAND Panel,"'^TEF-500.504&510.515,1&2,Soft Drop Shadow
	3'"
	Sets the text effect to Soft Drop Shadow 3 for the button with variable text range 500-504
	and 510-515.
^TXT	Sets Non-Unicode text.
Assign a text	Syntax:
string to those	"'^TXT-<vt addr range>,<button states range>,<new text>'"
buttons with a
	Variable:
defined address
range.	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	new text = 1 - 50 ASCII characters.
	Example:
	SEND_COMMAND Panel,"'^TXT-500.504&510.515,1&2,Test Only'"
	Sets the On and Off state text for buttons with the variable text ranges of
	500-504 & 510-515.

MVP-5200i Modero Viewpoint Widescreen Touch Panel 131