QUICK START GUIDE - OCTO2
ANALOG WAY | EDITION : 11/06 |
CONNECTIONS:
NOTE: Turn OFF all of your equipment before connecting.
cConnect the AC power supply cord to the OFX803 / OFD803 / OCP803 and to an AC power outlet.
dConnect your computer & video sources to the 8 universal inputs of the OFX803 / OFD803 / OCP803.
•If you need to connect a digital computer source, use the input #1
•Connect your others sources to the unused inputs.
IMPORTANT:Connect only one source by input.
eConnect your display device (projector, plasma screen...) to the HD15 or DVI connectors.
fTurn ON the OFX803 / OFD803 / OCP803 (rear panel switch). Then turn ON all your input sources and then your display device.
•Connection diagram:
4
1 | 2 | 2 | 3 | 3 |
2
ANALOG WAY
•HD15 connector pin assignment (inputs #2 to #7 - input #1 with a DVI/HD15 adaptor):
SIGNAL | COMPUTER (analog) | RGB/S VIDEO | YUV & HDTV (analog) | S.VIDEO (Y/C) |
| COMPOSITE VIDEO |
PIN 1 | RED. | RED. | Cr / Pr. | C (chrominance). |
|
|
PIN 2 | GREEN. | GREEN. | Y. | Y (luminance). |
| VIDEO (NTSC, PAL...) |
PIN 3 | BLUE. | BLUE. | Cb / Pb. |
|
|
|
PIN 6 | RED return. | RED return. | Cr / Pr return. | C return. |
|
|
PIN 7 | GREEN return. | GREEN return. | Y return. | Y return. |
| return. |
PIN 8 | BLUE return. | BLUE return. | Cb / Pb return. | 10 | 5 | 1 |
PIN 10 | GND. | GND. |
|
|
| |
|
|
|
| |||
PIN 13 | H sync or C sync (S). | C sync (S). |
|
|
|
|
PIN 14 | V sync. |
|
|
|
| 6 |
|
|
|
| 15 |
| |
SETTINGS: |
|
|
|
| 11 | |
|
|
|
|
| ||
|
|
|
|
|
|
cWe recommend resetting the OFX803 / OFD803 / OCP803 device to all of its default values, with the front panel LCD menu (CONTROL > default value > yes) before proceeding.
dSelect the fast or seamless switching mode with the LCD menu (SWITCHING > fast switching or seamless).
eSelect the Auto settings function with the LCD menu (INPUT > Auto settings). This function will detect automatically the source type connected to the inputs of the device. Sometimes, the auto setting may not detect the source type: in this case select manually the source type with the LCD menu (INPUT > Input type).
fIf you have selected the fast switching mode: select one of the output formats with the LCD menu (OUTPUT > output format). Then select the output rate with the LCD menu (OUTPUT > output rate).
gDisplay device adjustment:
•IN SEAMLESS MODE: Select the reference computer source. The reference computer image is displayed onto the output. Adjust directly the display device itself, using its position and size controls, to fill the computer image in full screen.
•IN FAST SWITCHING MODE: Display the centering pattern with the LCD menu (OUTPUT > test pattern > centering). Display a black output. Adjust directly the display device itself, using its position and size controls, to fill the centering pattern in full screen.
hFor each input source connected to the device, make the following adjustments: