Anritsu Series MS278XB Menu Archive Front Panel Menus Marker Config Menu, Display Lines Menu

Menu Archive	Front Panel Menus
Marker Config Menu

The Marker Config menu lets you select the following:

Table 4-11.Marker Config Menu

Marker -> Trace: To select the trace that receives the marker, press on the Marker On Trace field and select the trace from the fly-out menu.

Marker Table: A marker table can be displayed at the bottom of the graticule. To toggle the table on or off, press on the Off/On Marker Table button.

Marker Function: The Marker Function activates Noise Markers (refer to “Measuring Phase Noise” on page 5-27for information on phase noise measurements).

Display Lines Menu

The Display Lines menu lets you display limit lines.

Table 4-12.Display Lines Menu

Horizontal Line: To set the level for a limit line, press in the Horizontal Line parameter field and enter a value using the numeric keys. When a new value is entered, the terminator fly-out will appear with the available units. The following unit terminators are supported when the appropriate amplitude units are selected:

dBm, -dBm dBmV, -dBmV dBµV, -dBµV

W, mW, µW, nW, pW, fW, aW V, mV, µV, nV, pV

Press on the desired units to terminate the entry, then toggle the limit line on by pressing on the Off/On toggle button.

4-18 MS278XB OM