ELITE SERIES USER MANUAL | CP/M ENHANCEMENTS |
The easiest way to define within enhanced CP/M which type of drive is where is by specifying one long string of change commands, preceeded by:
For example, if you have an Elite Two as drive B:, a Disk if as drive C:, an Elite One as drive D:, and another Disk if as drive E:, you would type:
A:=B:2,C:0,D:1,E:0<RETURN>
Note that there is no need to respecify drive A: since it is already defined correctly. The drive type numbers come from that same table in which you found the number for FORMAT and PROFILE earlier. The “A:=” in front tells PROFILE you want to make these changes to the “system image” sitting on the diskette in drive
A:.Once you press <RETURN>, PROFILE will respond with:
Insert a system disk in A:. <RETURN> to continue/retry; <ESC> or
If you entered the command correctly, go ahead at press:
<RETURN>
If you just realized you made a mistake, press:
<ESC>
Page