ELITE SERIES USER MANUAL | DOS ENHANCEMENTS |
And for the destination drive number, type:
1<RETURN>
FID will then ask for the name of the file to copy, so type:
FID<RETURN>
After which, FID will give you a chance to either press <ESC> if you made an entry error, or <RETURN> to begin the copy.
Assuming your entries were correct, type:
<RETURN>
FID will then being asking for the source and destination diskettes just like CLONE did. The source diskette is your DOS 3.3 System Master (or the CLONE of it if you are using an Elite Three), and the destination diskette is your “full capacity system master”. Once you inserted the diskette FID requested, press:
<RETURN>
to tell FID to continue.
FID will tell you when it has finished the copy, and wait for you to press <RETURN’>. So go ahead and press:
<RETURN>
and FID will redisplay its main menu.
Page