ELITE SERIES USER MANUAL

CP/M ENHANCEMENTS

The length of these instructions is due to the fact that this will be your initial creation of an enhanced CP/M. Once this initial diskette is created, life becomes alot easier. Even though the instructions are lengthy, they are not terribly complex to follow.

If you intend to make use of either an Elite Two or Three drive as your system drive (A:), it may be necessary to temporarily configure your system in a different configuration than what will be your final configuration. A temporary problem arises if you do not have a second Elite Two or Three to match the one you will be using as drive A:. This is because you do not, as of yet, have a copy of CP/M which can deal with various combinations of drives. Since these multi-drive enhancement instructions only rely on you having two drives, you will only need to rearrange your A: and B: drives. Regardless of the type of drive you will be using as A: in your final configuration, you should temporarily reconfigure your system according to the following table:

Page 4-6