ThinkTank Manual |
|
|
| |
ENTER |
| Enter name of outline to open | ||
Command | key: | E |
|
|
Command | prefix: | No |
|
|
Locations: | EXISTING FILE Menu (FILES/EXISTS) | |||
|
| FILES/NEW | ||
|
| (hard disk systems only) | ||
See also: | FILES; | EXISTS; NEW | ||
If you give the FILES/EXISTS | command (or start up Think— | |||
Tank and choose EXISTS) and you have a hard disk system, Think— Tank displays the EXISTING FILE Menu. The ENTER option allows you to type in the name of your outline file. You must prefix the file name with the PASCAL device number or volume name of your data disk, but you need not include the outline suffix
. D B . See Appendix B for a discussion of PASCAL device and volume names.
If you give the FILES/NEW command (or start up ThinkTank and choose NEW) and you have a hard disk system, ThinkTank will prompt you to enter the name of your new outline file.
This is the equivalent of FILES/EXISTS/ENTER for FILES/NEW.
Again, you must prefix the file name with a PASCAL device num-
ber or volume name, but you need not include the .DB suffix.