ThinkTank Manual
Menu is Empty!
Where It May Occur: SPECIAL; UTILITIES/MENU/LOOK
Possible Causes: You’ve tried to examine the options on the SPECIALIST command menu, but there aren’t any.
Suggested Solutions: If you know that the menu should not be empty, try to read it in again by repeating the SPECIAL or LOOK command (see “Error Reading Menu! “ and “Error Reading Menu from Disk!”). Make sure the THINKTANK PROGRAM DISK is properly inserted in its drive. If the menu really is empty and you want to add commands to it, use the ADD option on the MENU BUILDER Command Menu.
No Deleted Outline to Restore!
Where It May Occur: DELETE/RESTORE
Possible Causes: The RESTORE option is intended to resurrect the last material you deleted with the DELETE/OUTLINE com- mand. Either you have not used this command with this
outline, or you have already restored the last material you deleted; you can only do so once. Note that there is no RESTORE/PARAGRAPH option.
Suggested Solutions: If you have already restored the material, you nay wish to copy it to another place in your outline.
No Outline in Drive n!
Where It May Occur: FILES/EXISTS
Possible Causes: You’ve asked ThinkTank to load an outline from a certain disk drive, but it can’t find one in that drive.
Suggested Solutions: Make sure the disk containing your outline is properly inserted in the drive.