ThinkTank Manual
Unable to Read or Write to Disk!
Where It May Occur: Varies
Possible Causes: ThinkTank tried to read (write) information from (on) your outline disk and couldn’t.
Suggested Solutions: If your disk is
is properly inserted in your drive and try the command again. If it still doesn’t work, your outline nay be damaged, your data disk defective, or your disk drives out of alignment. We recommend following these steps:
1.Port as much of the outline as possible to a text file to back it up.
2.Continue to work with the outline. If the error recurs, the problem may be your disk. Create a new outline on another disk and reconstruct the old one as best you can using your backup copies.
3.If the error continues to occur, the problem nay be in your disk drives. Ask your dealer to check out your computer system and service it if necessary.
Note on Disk Problems
If you repeatedly encounter errors with your program disk, the disk may be defective or your disk drives out of alignment. Try using your backup copy of the program, or contact your dealer or Living Videotext for a replacement (if you purchased ThinkTank within the last 90 days). If this doesn’t work, ask your dealer to check out your computer system and service it if necessary